Industry Solutions
Aerospace & Aviation Parts Feeding Solutions
Machined and stamped components fed to a documented, repeatable standard — with a SolidWorks model you approve first and a video factory acceptance test before anything ships.
Built Around Your Challenges
Challenges We Help You Overcome
Documented Before It Is Built
Every system is modeled in SolidWorks and the complete 3D model goes to you for approval before fabrication — every clearance, footprint and interface verified on paper first.
Proven Before It Ships
A full factory acceptance test at our Ohio facility, video documented, so the rate and the orientation are demonstrated on your parts before the system leaves.
Tooled to One Part Geometry
Aerospace components are rarely forgiving. Bowl tooling is machined to your exact geometry rather than adapted from something close.
Surface Finish Protected
Polyurethane coatings where the bowl would otherwise mark the part, and step feeders where the part should not be tumbled at all.
Built and Supported in Ohio
Designed, built and tested in Concord Township, with direct access to the engineers who built your system rather than a ticket queue.
Our Aerospace Solutions
Recommended Solutions
Vibratory Bowl Feeders
Custom-tooled bowls for any part geometry. The workhorse of automated parts feeding.
Learn More
Step Feeders
For heavy, large or easily-marred parts a bowl would tumble, and for lifting from a waist-height load.
Learn More
Vision Systems
For parts too subtly asymmetric for mechanical tooling to orient reliably.
Learn More
Escapements
Singulate a part and hold it exactly where your robot or tooling expects it.
Learn More
Real Systems, Shipped
Proven Applications
20 PPM
1-hour hands-free
Aerospace · Automotive · Medical
1100mm Bowl for Directional Machined Components
A custom-tooled 1100mm stainless bowl with a conveyor-fed vibratory hopper, Keyence sensors and EtherCAT-ready controls, feeding directional machined and stamped metal parts for robotic assembly.
Custom
Cut to your geometry
Precision Machining
Custom Bowl Tooling for Asymmetric Parts
Tooling machined into the bowl track to orient a directional component consistently — the part of a feeder that decides whether the whole system works.
33 PPM
Per system
Precision Machining
Step Feeders for Parts a Bowl Would Mar
Where a machined finish cannot survive a bowl, a step feeder elevates parts one tier at a time from a waist-height hopper to the outfeed, without tumbling.
The Bellco Difference
Why Customers Choose Bellco
Custom Engineered to Your Part
No templates. Every system is designed around your exact part geometry, feed rate, and integration requirements.
Designed in SolidWorks
You see and approve a full 3D model before we machine a single piece of tooling. No surprises on delivery.
Video Factory Acceptance Test
Every system runs a full FAT at our Ohio facility — video documented — so you know it works before it ships.
1-Year Warranty
Full parts and labor coverage backed by the Ohio team who built your system. Direct engineer access, no ticket queues.
20–40% Lower Cost
Direct manufacturing, no brokers, no markup. Premium quality at a price that consistently beats legacy suppliers.
Common Questions
Aerospace & Aviation FAQs
What documentation comes with the system?
A complete SolidWorks 3D model for your approval before fabrication, and a video-documented factory acceptance test on your parts before shipment. Both are standard on every system we build.
Can you feed parts that must not be marked?
Yes. Two routes depending on the part: a polyurethane-coated bowl, which stops the bowl surface marking the component, or a step feeder, which lifts parts one tier at a time instead of tumbling them. We will tell you which one your part needs.
Can you handle low-volume, high-mix production?
That is worth a conversation rather than a stock answer. A custom-tooled bowl is the right economics at volume on one part; a Bellco Flex platform with vision-guided picking is often better where the mix changes often. Send us the range and we will be straight with you about which pays back.
How do I know the system works before it arrives?
Two ways. You approve a full SolidWorks model before we machine a single piece of tooling, and every system runs a factory acceptance test at our Ohio facility that is video documented and sent to you.
How long does it take to get a quote?
Three business days is our average. Send us the part — or a drawing of it — along with your target feed rate and how parts need to be presented downstream, and an engineer will come back with a scoped quote.
How does Bellco pricing compare to other suppliers?
Bellco systems are typically priced 20–40% below traditional suppliers. We manufacture directly — no brokers, no middlemen — which lets us compete on price without cutting engineering time, material quality, or testing.
Ready to Start?
Let's Engineer Your Feeding System.
Send us the part, the rate, and the documentation you need alongside it. We will come back in three business days with a quote and a SolidWorks model you can review before we build a thing.
Talk to an Engineer
- Quote Turnaround
- 3 business days
- Design Review
- SolidWorks model before build
- FAT Video
- Included on every system
- Warranty
- 1 year, parts & labor
- Location
- Concord Township, Ohio