Proof

Projects in Vision Systems

Real systems, real specifications, and the engineering decisions behind them. Every project here was designed in SolidWorks, approved by the customer before fabrication, and factory tested before it left Concord Township.

By industry

By product

Tabletop Bellco step feeder with a stainless loading hopper, built to sit inside an existing robotic assembly cell

3 sizes One feeder, every pin correct

Robotics & Automation

Vision-Guided Tabletop Step Feeder Delivers Three Pin Sizes, Leading End Up, for Robotic Assembly

Three sizes of dual-pointed actuator pin, all the same diameter, each needing the tapered end leading. Standard orientation tooling could not tell the two ends apart.

Read the case study

Five Bellco feeders on a single shared baseplate: four vibratory bowls plus a step feeder, running together under eighty decibels

< 80 dB All five feeders running

Automotive · Robotics & Automation

One Frame, Five Feeders, Under 80 Decibels: Vibration Mitigation That Saves Space and Cost

Five feeders into one robotic assembly cell, on a single shared baseplate instead of five separate machines — and quieter than most single-bowl feeders.

Read the case study

Stand-alone Bellco step feeder on rolling casters, feeding tapered tubes to a 400mm linear track

33 PPM Per system

Manufacturing / OEMs

Paired Step Feeders with Vision and a Bi-Directional Escapement for Tapered-Tube Assembly

Two systems on one proposal for the same customer: one where either end could lead, and one where the nose end had to lead every cycle — then escape left or right on command.

Read the case study